Notes on installation of magneto optic switches

发布时间:2017-06-13 09:17 | 编辑:科毅光通信科技 | 来源:www.coreray.net | 17 次浏览
The magneto optic switch using Faraday rotation effect is to change the effect of the magneto-optical crystal on the polarization surface of the incident polarized light by changing the applied magnetic field, so as to achieve the effect of switching the optical path. Then, in actual production and life, what are the considerations when magneto optical switches are installed?Below, please foll...

The magneto optic switch using Faraday rotation effect is to change the effect of the magneto-optical crystal on the polarization surface of the incident polarized light by changing the applied magnetic field, so as to achieve the effect of switching the optical path. Then, in actual production and life, what are the considerations when magneto optical switches are installed?

Below, please follow the Nanning branch of Yi Yi Communication Technology Co., Ltd. Xiaobian together to understand in detail, so that we can better install!

(1) before installation should clean up dirt in the wiring box, the box body without deformation, rupture, water easily caused by remnants of difficult installation accident, the switch from the ground height is 1.3 - 1.5 meters, if the room is equipped with wall board, at least from the top board above 20cm.

(2) that apply on line switch, socket should be installed in the junction box of Ming, closet in switches and sockets should be installed the necessary waterproof cover, avoid many stocks also arranged in the same terminal, avoid the load exceeds the line power caused by overload.

(3) the installation of magneto optic switch, air conditioners, refrigerators, should keep away from heat, fire, LED digital tube air temperature sensitive place, and don't make it straight to the window, the window to prevent the hot air flow disturbance and people walking will cause false positives.

(4) the magneto optic switch should not be too high from the ground, and as much as possible to avoid the simultaneous loading of multiple strands into the same terminal, so as to avoid overload when the load exceeds the line power. In addition, the magneto optic switch needs to check the switch before it is energized. If the insulation of the contactor drops, it may damage the equipment and cause serious consequences.

To sum up, the above is Nanning Branch Yi light communication technology Co., Ltd. Xiao Bian learned about the magneto optical switch installation notes, I hope the installation staff can be observed carefully!


相关文章


CATEGORY

News Center
选择语言: