1x2 Solid-state Optical Switch

发布时间:2018-02-26 13:28 | 编辑:optical switch | 32 次浏览
1×2 Solid-State Fiber optic Switch ​The 1x1 and 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. T...


1×2  Solid-State Fiber optic Switch


The 1x1 and 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1x1,1x2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.

The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.

 

Features

l      Low Insertion Loss

l      Wide Wavelength Range

l      Low Crosstalk

l      High Stability, High Reliability

l      Epoxy-free on Optical Path

l      Latching and Non-latching


Application

l  Metropolitan Area Network

l  R&D in Laboratory

l  System Monitoring

l  Configurable OADM

 

Performance

Parameters


SOSW-1×2

Wavelength Range

nm  

1295~1325,1520~1580

Testing Wavelength

nm  

1310/1550  

Insertion Loss     

dB  

Typ:0.7   ,Max:1.0

Return Loss  

dB  

≥50  

Crosstalk

dB  

≥45  

PDL

dB  

≤0.10  

Polarization Mode Dispersion

ps  

≤0.20  

TDL   

dB  

≤0.25  

Optical Power Handling

mw  

300  

Switch Speed (rise, fall)

us  

50~200  

Repetition Rate

Hz  

2K  

Operation Temperature

-40~+85  

Storage Temperature

-40~+85  

Dimension

mm  

(L)58.2×(W)8.4×(H)8.4(±0.2)

 

 Electrical Driving Information

The switch is actuated by applying a voltage pulse. Applying one polarity pulse, one light path will be connected and latched to the position. Applying a reversed polarity pulse, another light path will be connected and latched to the position after pulse removed.

                                              SOSW-1×2Electrical Driving Information .jpg

Driving kit with USB and TTL interfaces and Windows TM GUI is available. We also offer RS232 interface as an option – please contact Coreray sales.



2x1 Switch         

SOSW-1×2 2x1switch .jpg

                                                                

1x2 Switch

SOSW-1×2 1x2switch .jpg


    

* The typical drive voltage of single stage is 2.5V.

* Over this value will damage the device.



Mechanical Dimensions (mm)


SOSW-1×2Mechanical Dimensions.jpg



Ordering Information: SOSW-A-B-C-D-E-F-G

A

B

C

D

E

F

G  

Type

Mode

Wavelength

Switch

Fiber Diameter

Fiber Length

Connector

1X1

1X2

2X1  

SM:9/125um

13: 1310nm

15: 1550nm

2:Dual Stage 0   :Special

25:250um

90:900um

05:0.5m

10:1.0m

15:1.5m

OO: None

FP: FC/PC

FA: FC/APC

SP: SC/PC

SA: SC/APC

LP: LC/PC

LA: LC/APC

 

 

 

 

 

 

 

 


上一篇: VOA

相关文章


CATEGORY

News Center
选择语言: